- Trang chủ/
- SẢN PHẨM/
- Hệ Bu Lông Nở/
- Vít Nở Nhựa/
- RAMPLUG
Thông số kỹ thuật
Tính năng và tiện ích
Producf Advanfages
● Anti rotation barbs prevent the anchor from rotating in the hole
● Nylon sleeve reduces cold bridging compared with metal fixings
● Countersunk sleeve and screw allows flush finish
● Zinc plated drive screw for corrosion resistance (dry internal use)
● Nylon sleeve assists shear capacity
● Through fixing lowers in place cost
Subsfrafes
Specificafion
The RamPlug™ Anchor is a light duty, rotation setting interference fit anchor.
Ứng dụng
● Wall plates
● Sole plates
● Battens
● Door and window frames
Hướng dẫn sử dụng
1. Drill a hole of the correct diameter through the fixture to the minimum drilling depth given in the technical data table, blow out dust. If the fixture thickness is less than the maximum given in the table below, the hole depth has to be increased accordingly.
2. Position the anchor in the hole through the fixture using light hammer blows until the collar of the anchor makes contact with the part to be fixed.
3. Tighten using a screwdriver until the head of the screw is flush with the collar of the anchor.
Tài liệu kỹ thuật
Dữ liệu đang được cập nhật ...